PD4-N59/N60 IP
High-pole servo motor (stepper motor) with integrated controller in sizes NEMA 23 (PD4-N59) and NEMA 24 (PD4-N60) and protection class IP65 (except shaft output), flange size 60 mm. With two M12 plug connections. The PD6-N motors come with firmware optimized for RS485. To use CANopen, download the NanoPro software, connect the motor to the PC via the serial interface and perform a firmware update with NanoPro. You can download the appropriate software here.
Keep in mind that:
When connecting a connected laptop to this motor via USB, a USB isolator must be used to prevent damage to the integrated controller. The USB isolator is not required when using the battery.
For new designs we recommend the PD4-E motors.
PD4-N59/N60 IP Product Overview
| Article | Nema | Size | Length"A" | Interface | Holding Torque | Rated Current (RMS) | Manual | CAD |
|---|---|---|---|---|---|---|---|---|
| PD4-N5918X4204-IP-2 | 23 | 56 mm | 66.5 mm | RS485 | 53.7 Ncm | 12 VDC - 48 VDC | RS485 | .stp |
| PD4-N5918M4204-IP-2 | 23 | 56 mm | 80.6 mm | RS485 | 113 Ncm | 12 VDC - 48 VDC | RS485 | .stp |
| PD4-N5918L4204-IP-2 | 23 | 56 mm | 101.6 mm | RS485 | 198 Ncm | 12 VDC - 48 VDC | RS485 | .stp |
| PD4-N6018L4204-IP-2 | 24 | 56 mm | 112 mm | RS485 | 354 Ncm | 12 VDC - 48 VDC | RS485 | .stp |