SCA5618

Steppermotor with connector – NEMA 23

High-torque stepper motor with integrated connector in size NEMA 23 (56 mm). The SCA5618 is available in three lengths and with two different windings.

The A shaft comes in two versions: with D-Cut and 24mm length (A) and without D-Cut with 20.6mm length (A2).

Holding torque up to 2.3 Nm
1.8° step angle
Integrated connector

DATASHEETS
Article	Nema	Size	Holding Torque	Resolution	Current per Winding	Length "A"	CAD
SCA5618X2804-A	23	56 mm	60 Ncm	1.8 °/step	2.8 A	40.5 mm	.stp
SCA5618X2804-B	23	56 mm	60 Ncm	1.8 °/step	2.8 A	40.5 mm	.stp
SCA5618X2804-A2	23	56 mm	60 Ncm	1.8 °/step	2.8 A	40.5 mm	.stp
SCA5618X2804-B2	23	56 mm	60 Ncm	1.8 °/step	2.8 A	40.5 mm	.stp
SCA5618X4204-A	23	56 mm	60 Ncm	1.8 °/step	4.2 A	40.5 mm	.stp
SCA5618X4204-B	23	56 mm	60 Ncm	1.8 °/step	4.2 A	40.5 mm	.stp
SCA5618X4204-A2	23	56 mm	60 Ncm	1.8 °/step	4.2 A	40.5 mm	.stp
SCA5618X4204-B2	23	56 mm	60 Ncm	1.8 °/step	4.2 A	40.5 mm	.stp
SCA5618M2804-A	23	56 mm	140 Ncm	1.8 °/step	2.8 A	56 mm	.stp
SCA5618M2804-B	23	56 mm	140 Ncm	1.8 °/step	2.8 A	56 mm	.stp
SCA5618M2804-A2	23	56 mm	140 Ncm	1.8 °/step	2.8 A	56 mm	.stp
SCA5618M2804-B2	23	56 mm	140 Ncm	1.8 °/step	2.8 A	56 mm	.stp
SCA5618M4204-A	23	56 mm	140 Ncm	1.8 °/step	4.2 A	56 mm	.stp
SCA5618M4204-B	23	56 mm	140 Ncm	1.8 °/step	4.2 A	56 mm	.stp
SCA5618M4204-A2	23	56 mm	140 Ncm	1.8 °/step	4.2 A	56 mm	.stp
SCA5618M4204-B2	23	56 mm	140 Ncm	1.8 °/step	4.2 A	56 mm	.stp
SCA5618L2804-A	23	56 mm	230 Ncm	1.8 °/step	2.8 A	76.5 mm	.stp
SCA5618L2804-B	23	56 mm	230 Ncm	1.8 °/step	2.8 A	76.5 mm	.stp
SCA5618L2804-A2	23	56 mm	230 Ncm	1.8 °/step	2.8 A	76.5 mm	.stp
SCA5618L2804-B2	23	56 mm	230 Ncm	1.8 °/step	2.8 A	76.5 mm	.stp
SCA5618L4204-A	23	56 mm	230 Ncm	1.8 °/step	4.2 A	76.5 mm	.stp
SCA5618L4204-B	23	56 mm	230 Ncm	1.8 °/step	4.2 A	76.5 mm	.stp
SCA5618L4204-A2	23	56 mm	230 Ncm	1.8 °/step	4.2 A	76.5 mm	.stp
SCA5618L4204-B2	23	56 mm	230 Ncm	1.8 °/step	4.2 A	76.5 mm	.stp